검색 결과: BACT4D1 in Inductor
견적서 보내기  »

부품 번호 BACT4D1 에 대한 견적을 받으려면 품목을 선택하시거나 이 페이지 하단의 부품 번호 BACT4D1 내에서 검색을 세분화 하세요.
아직은 브로커포럼의 회원사로 가입 준비가 되지 않으셨다면 무료로 BACT4D1 판매자에게 연락하실 수 있습니다.

결과 1-4 에 대한 BACT4D1 (의 4)
고급 검색 보기

Inductor

An inductor, also called a coil or reactor, is a passive two-terminal electrical component which resists changes in electric current passing through it. It consists of a conductor such as a wire, usually wound into a coil. When a current flows through it, energy is stored temporarily in a magnetic field in the coil. When the current flowing through an inductor changes, the time-varying magnetic field induces a voltage in the conductor, according to Faraday’s law of electromagnetic induction, which opposes the change in current that created it. An inductor is characterized by its inductance, the ratio of the voltage to the rate of change of current, which has units of henries (H). Inductors have values that typically range from 1 µH (10−6H) to 1 H. Many inductors have a magnetic core made of iron or ferrite inside the coil, which serves to increase the magnetic field and thus the inductance. Along with capacitors and resistors, inductors are one of the three passive linear circuit elements that make up electric circuits. Inductors are widely used in alternating current (AC) electronic equipment, particularly in radio equipment. They are used to block the flow of AC current while allowing DC to pass; inductors designed for this purpose are called chokes. They are also used in electronic filters to separate signals of different frequencies, and in combination with capacitors to make tuned circuits, used to tune radio and TV receivers.

광고