Результаты поиска: BLF245 в JFET
Запрос на ценовое предложение (RFQ)  »

Выбeрите позицию, чтобы получить ценовое предложение по номеру детaли BLF245 или используйте раздел «Варианты поиска по номеру детали» внизу этой страницы.
Если Вы еще не партнер The Broker Forum, получите свой бесплатный доступ для установления связи с BLF245 продавцами.

JFET

The junction gate field-effect transistor (JFET or JUGFET) is the simplest type of field-effect transistor. They are three-terminal semiconductor devices that can be used as electronically-controlled switches, amplifiers, or voltage-controlled resistors. Unlike bipolar transistors, JFETs are exclusively voltage-controlled in that they do not need a biasing current. Electric charge flows through a semiconducting channel between source and drain terminals. By applying a reverse bias voltage to a gate terminal, the channel is "pinched", so that the electric current is impeded or switched off completely. A JFET is usually on when there is no potential difference between its gate and source terminals. If a potential difference of the proper polarity is applied between its gate and source terminals, the JFET will be more resistive to current flow, which means less current would flow in the channel between the source and drain terminals. Thus, JFETs are sometimes referred to as depletion-mode devices. JFETs can have an n-type or p-type channel. In the n-type, if the voltage applied to the gate is less than that applied to the source, the current will be reduced (similarly in the p-type, if the voltage applied to the gate is greater than that applied to the source). A JFET has a large input impedance (sometimes on the order of 1010 ohms), which means that it has a negligible effect on external components or circuits connected to its gate. The JFET is a long channel of semiconductor material, doped to contain an abundance of positive charge carriers or holes (p-type), or of negative carriers or electrons (n-type). Ohmic contacts at each end form the source (S) and drain (D). A pn-junction is formed on one or both sides of the channel, or surrounding it, using a region with doping opposite to that of the channel, and biased using an ohmic gate contact (G).

Transistor > JFET

Наименование детали	DS	Производитель	Дата выпуска	Кол-во	Регион	Активный
BF245B		Fairchild	-	2000	Hong Kong	Связаться с продавцом

Отправьте запрос на искомый компонент BLF245   »